What are the cooling methods of the reducer? 1. The oil film cooling of the rotor This kind of cooling method is to connect an oil pipe at the entrance of the equipment, and use evenly dripping cooling oil to take away the heat of the rotor. 2, air cooling The so-called wet reducer means […]

Reasons for the high temperature of the reducer During the use of the reducer, the temperature will be too high, so what is the reason? 1. Reducer bearing wear or cage damage, etc.: Check the wearable parts of mechanical equipment in time, and replace worn bearings. 2. Axial movement of the tightening bushing: remove the

What are the use conditions of the reducer? 1. The reducer is allowed to be used in continuous working occasions, the working environment is non-corrosive, and it is allowed to run in both forward and reverse directions at the same time; the working environment temperature is -40-45℃, if it is lower than 0℃, lubricate before

Introduction and Classification of Reducer 1.Introduction The reducer is generally used for low-speed and high-torque transmission equipment. The motor, internal combustion engine or other high-speed running power is used to achieve the purpose of deceleration by meshing with the large gear on the output shaft through the gear with fewer teeth on the input shaft

Interpretation of reducer technical terms   When we buy a reducer, we usually encounter some words in the industry. If we don’t understand it, it may be misunderstood, which will affect the selection of the reducer. To understand the parameters of the reducer, first learn these professional terms. Code: Many engineers will say a few

What goes into a blog post? Helpful, industry-specific content that: 1) gives readers a useful takeaway, and 2) shows you’re an industry expert. Use your company’s blog posts to opine on current industry topics, humanize your company, and show how your products and services can help people.